SHISEIDO Evolving Light Radiance Compact Foundation

نظرة عامة على المكونات

ترتيب الملصق. اللون هو تقييمنا الداخلي: الأخضر روتيني، الأصفر مقيد أو يستحق النظر، الأحمر محظور أو عالي الخطورة، الرمادي لم يُفحَص بعد.

تُذكر المكونات بترتيب الملصق؛ يعكس الترتيب الملصق فقط، وليس التركيزات الدقيقة.

1. ماء
2. Dimethicone
3. Titanium Dioxide
4. Diphenylsiloxy Phenyl Trimethicone
5. Ethylhexyl methoxycinnamate
6. Trifluoropropyldimethyl/trimethylsiloxysilicate
7. الجليسرول
8. Iron Oxides
9. جليكول البوتيلين
10. Hydrogenated Polydecene
11. CI 77491
12. Bis-butyldimethicone polyglyceryl-3
13. Disteardimonium Hectorite
14. Titanium Dioxide
15. Sorbitan sesquiisostearate
16. Xylitol
17. Erythritol
18. Dimethicone/PEG-10/15 Crosspolymer
19. Mica
20. Barium Sulfate
21. Phenoxyethanol
22. Synthetic fluorphlogopite
23. Aluminum hydroxide
24. Polysilicone-2
25. Disodium EDTA
26. Stearic Acid
27. Calcium aluminum borosilicate
28. Tocopherol
29. Dipropylene glycol
30. Triethoxycaprylylsilane
31. Triethoxysilylethyl Polydimethylsiloxyethyl Dimethicone
32. Polyquaternium-51
33. BHT
34. Citrus Unshiu Peel Extract
35. Thymus serpyllum
36. Alumina
37. Fagus Sylvatica Bud Extract
38. Hydrolyzed conchiolin protein
39. Polymethylsilsesquioxane
40. Dimethicone/Vinyl Dimethicone Crosspolymer

أبرز النقاط

Free of alcoholFree of parabensFree of sulfatesFree of essential oilsFree of formaldehyde releasersContains siliconesContains fragranceContains mineral oilContains PEGContains animal-derived

المكونات الرئيسية

ANTIPLAQUE

ماء

ANTIFOAMING

DimethiconeDiphenylsiloxy Phenyl Trimethicone

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

LIGHT STABILIZER

Ethylhexyl methoxycinnamate

BINDING

Trifluoropropyldimethyl/trimethylsiloxysilicate

DENATURANT

الجليسرول

着色剂

Iron Oxides

مكونات أخرى

جليكول البوتيلينHydrogenated PolydeceneCI 77491Bis-butyldimethicone polyglyceryl-3Disteardimonium HectoriteTitanium DioxideSorbitan sesquiisostearateXylitolErythritolDimethicone/PEG-10/15 CrosspolymerMicaBarium SulfatePhenoxyethanolSynthetic fluorphlogopiteAluminum hydroxidePolysilicone-2Disodium EDTAStearic AcidCalcium aluminum borosilicateTocopherolDipropylene glycolTriethoxycaprylylsilaneTriethoxysilylethyl Polydimethylsiloxyethyl DimethiconePolyquaternium-51BHTCitrus Unshiu Peel ExtractThymus serpyllumAluminaFagus Sylvatica Bud ExtractHydrolyzed conchiolin proteinPolymethylsilsesquioxaneDimethicone/Vinyl Dimethicone Crosspolymer

ألقِ نظرة سريعة

شرح المكونات

ماء

Primary solvent and base; requires preservative system to prevent microbial growth

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Diphenylsiloxy Phenyl Trimethicone

Phenyl trimethicone for anti-foaming and slip; silicone-based, silky feel

Ethylhexyl methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Trifluoropropyldimethyl/trimethylsiloxysilicate

Fluorosilicone copolymer for dry touch and adhesion; inert silicone, low irritancy, enhances makeup longevity.

الجليسرول

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

جليكول البوتيلين

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Hydrogenated Polydecene

Hydrogenated polydecene, light mineral oil alternative, low comedogenic; silky, non-greasy.

CI 77491

Iron oxides red; physical pigment. Coloring and photo-protective, stable and non-irritating.

Bis-butyldimethicone polyglyceryl-3

لم يُفكَّد بعد

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Sorbitan sesquiisostearate

Non-ionic emulsifier for O/W systems; very low irritation when pure, but patch testing is recommended for sensitive consumers.

Xylitol

Polyol humectant, sweet taste; water-soluble, high hygroscopy, excess draws moisture.

Erythritol

Polyol humectant with light feel; high hygroscopy, watch in dry climates.

Dimethicone/PEG-10/15 Crosspolymer

Silicone/PEG crosspolymer for film forming and viscosity; low irritation; PEG debate at high conc

Mica

Mineral colorant for pearlescence; heavy metal screening required

Barium Sulfate

Inert mineral filler and thickener; not absorbed by skin, avoid dust inhalation in powder processes

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Synthetic fluorphlogopite

Mica filler at 1-10%; luster/thickening, inert, verify mineral purity, no public comedogenic data.

Aluminum hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Polysilicone-2

لم يُفكَّد بعد

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Calcium aluminum borosilicate

Synthetic powder filler for smooth feel and coverage; inert.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Dipropylene glycol

Solvent for essential oils; better humectancy than PEG

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Triethoxysilylethyl Polydimethylsiloxyethyl Dimethicone

Silane-modified silicone enhancing adhesion to skin; silicone-based conditioner

Polyquaternium-51

Cationic polymer at 0.1-1%; film former in hair care, enhances shine and combability

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Citrus Unshiu Peel Extract

Citrus peel extract providing fragrance

Thymus serpyllum

لم يُفكَّد بعد

Alumina

Alumina, inorganic abrasive/thickener; nano-grade requires inhalation risk assessment.

Fagus Sylvatica Bud Extract

Botanical bud extract used as a tonic and skin conditioner; monitor for plant-derived contact sensitization.

Hydrolyzed conchiolin protein

Hydrolyzed pearl protein for hydration/repair; animal-derived; low MW aids penetration, low sensitization

Polymethylsilsesquioxane

Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.