lists 30 ingredients on its label, 30 decoded. See what each one does, its irritancy and comedogenic tendency, and its status in national inventories.
Ingredients overview
Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.
Ingredients are listed in label order; the order reflects the label only, not exact concentrations.
- Water
- Dibutyl Adipate
- Polymethylsilsesquioxane
- Propanediol
- Diisopropyl Sebacate
- Drometrizole Trisiloxane
- Ethylhexyl Triazone
- Diethylamino Hydroxybenzoyl Hexyl Benzoate
- Niacinamide
- Terephthalylidene Dicamphor Sulfonic Acid
- 1,2-Hexanediol
- Hydrolyzed Hyaluronic Acid
- Pentylene Glycol
- Tromethamine
- Sodium Polyacryloyldimethyl Taurate
- Poly C10-30 Alkyl Acrylate
- Glyceryl Stearate
- Methylpropanediol
- Silica
- Polyester-5
- Polyacrylate Crosspolymer-6
- Sodium Stearoyl Glutamate
- Polyamide-8
- Adenosine
- Polyether-1
- Cetyl Hydroxyethylcellulose
- Xyloglucan
- Zinc Pca
- Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate
- Behenyl Alcohol
Highlights
Free of fragranceFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains siliconesContains alcohol
Formulation view Anhydrous formula using light esters and silicones for a matte finish. Features niacinamide, broad-spectrum UV filters, and hydrolyzed hyaluronic acid. Suitable for oily skin in summer. Factory note: High dispersion requirements to prevent settling in oil-free systems.E · AI inference · to be verified
Key ingredients
- ANTIPLAQUE
- Water
- SKIN CONDITIONING - EMOLLIENT
- Dibutyl AdipateDiisopropyl Sebacate
- OPACIFYING
- Polymethylsilsesquioxane
- SOLVENT
- Propanediol
- LIGHT STABILIZER
- Drometrizole TrisiloxaneEthylhexyl TriazoneDiethylamino Hydroxybenzoyl Hexyl Benzoate
Other ingredients
NiacinamideTerephthalylidene Dicamphor Sulfonic Acid1,2-HexanediolHydrolyzed Hyaluronic AcidPentylene GlycolTromethamineSodium Polyacryloyldimethyl TauratePoly C10-30 Alkyl AcrylateGlyceryl StearateMethylpropanediolSilicaPolyester-5Polyacrylate Crosspolymer-6Sodium Stearoyl GlutamatePolyamide-8AdenosinePolyether-1Cetyl HydroxyethylcelluloseXyloglucanZinc PcaPentaerythrityl Tetra-Di-T-Butyl HydroxyhydrocinnamateBehenyl Alcohol
Skim through
| Ingredient | What it does | Irr. · Com. | Rating |
|---|---|---|---|
| Water | ANTIPLAQUE, SKIN CONDITIONING, SOLVENT | 0 · – | Green |
| Dibutyl Adipate | SKIN CONDITIONING - EMOLLIENT, FILM FORMING, PLASTICISER, SKIN CONDITIONING, SOLVENT | 0 · – | Green |
| Polymethylsilsesquioxane | OPACIFYING | 0 · – | Green |
| Propanediol | SOLVENT, VISCOSITY CONTROLLING | 0 · – | Green |
| Diisopropyl Sebacate | SKIN CONDITIONING - EMOLLIENT, PLASTICISER, SKIN CONDITIONING, SOLVENT | 0 · – | Green |
| Drometrizole Trisiloxane | LIGHT STABILIZER, UV ABSORBER, UV FILTER · 限制 VI/16 | 1 · – | Yellow |
| Ethylhexyl Triazone | LIGHT STABILIZER, UV ABSORBER, UV FILTER · 限制 VI/15 | 0 · – | Yellow |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate | LIGHT STABILIZER, UV ABSORBER, UV FILTER · 限制 VI/28 | 0 · – | Yellow |
| Niacinamide | SMOOTHING | 0 · – | Green |
| Terephthalylidene Dicamphor Sulfonic Acid | LIGHT STABILIZER, UV ABSORBER, UV FILTER · 限制 VI/7 | 3 · – | Yellow |
| 1,2-Hexanediol | SKIN CONDITIONING, SOLVENT | 0 · – | Green |
| Hydrolyzed Hyaluronic Acid | HAIR CONDITIONING, HUMECTANT, SKIN CONDITIONING | 0 · – | Green |
| Pentylene Glycol | SKIN CONDITIONING, SOLVENT | 0 · – | Green |
| Tromethamine | BUFFERING, FRAGRANCE · 限制 III/61 | 0 · – | Green |
| Sodium Polyacryloyldimethyl Taurate | EMULSION STABILISING, VISCOSITY CONTROLLING | 0 · – | Green |
| Poly C10-30 Alkyl Acrylate | EMULSION STABILISING, VISCOSITY CONTROLLING | 0 · – | Green |
| Glyceryl Stearate | SKIN CONDITIONING - EMOLLIENT, SURFACTANT - EMULSIFYING | 0 · – | Green |
| Methylpropanediol | SOLVENT | 0 · – | Green |
| Silica | ABRASIVE, ABSORBENT, ANTICAKING, BULKING, OPACIFYING, VISCOSITY CONTROLLING | 0 · – | Green |
| Polyester-5 | SKIN CONDITIONING, FILM FORMING | 0 · – | Green |
| Polyacrylate Crosspolymer-6 | EMULSION STABILISING, VISCOSITY CONTROLLING | 0 · – | Green |
| Sodium Stearoyl Glutamate | CLEANSING, SURFACTANT - EMULSIFYING, HAIR CONDITIONING, SKIN CONDITIONING | 0 · – | Green |
| Polyamide-8 | FILM FORMER | 0 · – | Green |
| Adenosine | SKIN CONDITIONING | 0 · – | Green |
| Polyether-1 | SURFACTANT, VISCOSITY CONTROLLING | 0 · – | Green |
| Cetyl Hydroxyethylcellulose | EMULSION STABILISING, FILM FORMING, VISCOSITY CONTROLLING | — | Green |
| Xyloglucan | HUMECTANT | 0 · – | Green |
| Zinc Pca | HUMECTANT, SKIN CONDITIONING · 限制 III/24 | 1 · – | Green |
| Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate | ANTIOXIDANT | 0 · – | Green |
| Behenyl Alcohol | BINDING, SKIN CONDITIONING - EMOLLIENT, EMULSION STABILISING, VISCOSITY CONTROLLING | 0 · – | Green |
The comedogenic column only shows scores with a published source. A blank means "no public source", not "non-comedogenic".
Ingredients explained
Each note carries its evidence level: C comes from official inventories (NMPA names, CosIng functions, annex restrictions); E is AI inference nobody has checked yet — treat it as a candidate. How we grade evidence →
- Water
- Primary solvent and base; requires preservative system to prevent microbial growthE · AI inference · to be verified
- Dibutyl Adipate
- Light ester, solvent and emollient, fresh feel and volatility, non-comedogenic.B · Third-party verified
- Polymethylsilsesquioxane
- Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.B · Third-party verified
- Propanediol
- Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternativeB · Third-party verified
- Diisopropyl Sebacate
- Low-viscosity, high-flash-point ester; excellent spreadability, non-greasy feelB · Third-party verified
- Drometrizole Trisiloxane
- UVB sunscreens agent; limited by EU, must be used within strict limits.E · AI inference · to be verified
- Ethylhexyl Triazone
- UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.C · Official source
- Diethylamino Hydroxybenzoyl Hexyl Benzoate
- Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.C · Official source
- Niacinamide
- Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivityC · Official source
- Terephthalylidene Dicamphor Sulfonic Acid
- UV absorber and light stabilizer; EU regulated, check max levels and formulation stabilityC · Official source
- 1,2-Hexanediol
- Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservativesC · Official source
- Hydrolyzed Hyaluronic Acid
- Low-MW humectant with superior penetration vs high-MW; 0.1-0.5% typical, hygroscopic, store dry to prevent clumping.B · Third-party verified
- Pentylene Glycol
- Polyol humectant at 1-3%; low irritancy, suitable for sensitive skinC · Official source
- Tromethamine
- pH adjuster, alkaline; precise dosing requiredB · Third-party verified
- Sodium Polyacryloyldimethyl Taurate
- Sodium polyacryloyldimethyl taurate for emulsion stabilization and thickening; ionic polymer, check ion compatibility.B · Third-party verified
- Poly C10-30 Alkyl Acrylate
- Synthetic thickener and emulsion stabilizer for gels or emulsions; generally inert to skin; watch residual monomers.B · Third-party verified
- Glyceryl Stearate
- Emulsifier at 1-3%; may require acid to prevent saponificationC · Official source
- Methylpropanediol
- Diol solvent and extraction carrier; enhances solubility of actives, low irritation profile.B · Third-party verified
- Silica
- Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control productsC · Official source
- Polyester-5
- Synthetic polymer for film/gloss; smooth feel, no known irritation, compatible with most skin typesE · AI inference · to be verified
- Polyacrylate Crosspolymer-6
- Water-soluble thickener; requires neutralizer, performs best at pH 5–7B · Third-party verified
- Sodium Stearoyl Glutamate
- Mild amino-acid surfactant, poor solubility, pairs with fatty alcohols, fine foam.B · Third-party verified
- Polyamide-8
- Synthetic polymer forming a film to improve durability and feel in makeup. No known high sensitization.E · AI inference · to be verified
- Adenosine
- Skin conditioner at 0.1-1%; used for anti-aging and repairB · Third-party verified
- Polyether-1
- Polyether polymer for viscosity control or co-surfactant; specific structure varies by supplier.E · AI inference · to be verified
- Cetyl Hydroxyethylcellulose
- Water-soluble cellulose derivative; viscosity booster and emulsion stabilizer; pH sensitive.B · Third-party verified
- Xyloglucan
- Botanical humectant polysaccharide, enhances barrier hydration and repair; high viscosity, often needs solubilizationB · Third-party verified
- Zinc Pca
- Zinc salt for sebum control and antimicrobial; often paired with PCA sodium, high levels may cause sensitizationE · AI inference · to be verified
- Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate
- High-efficiency lipid-soluble antioxidant preventing oil rancidity; very low usage, typically 0.05-0.1%, ensure even distribution, avoid metal-catalyzed oxidation.B · Third-party verified
- Behenyl Alcohol
- Fat alcohol emulsifier/thickener at 1-3%; low comedogenic risk, check solubility in strong acid/base systems, add antioxidants.B · Third-party verified
Source: full ingredient list published on the product label, collected 2026-09-17. Ratings are our internal reading, not a regulatory conclusion. · Product page
Analyze this product · redesign · create my project → Make a product in this category →