Rohto rohto dermacept rx moisturizing sunscreen spf 30 pa
Rohto Rohto rohto dermacept rx moisturizing sunscreen spf 30 pa lists 21 ingredients on its label, 21 decoded. See what each one does, its irritancy and comedogenic tendency, and its status in national inventories.
Ingredients overview
Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.
Ingredients are listed in label order; the order reflects the label only, not exact concentrations.
- Aqua
- Triethylhexanoin
- Ethylhexyl Methoxycinnamate
- Zinc Oxide
- Silica
- Butylene Glycol
- Titanium Dioxide
- Diethylamino Hydroxybenzoyl Hexyl Benzoate
- PEG-20 Sorbitan Isostearate
- Stearyl Alcohol
- Polysorbate 60
- Hydrated Silica
- Phenoxyethanol
- Ammonium Acryloyldimethyltaurate/VP Copolymer
- Hydrogen Dimethicone
- Hydrolyzed Jojoba Esters
- Hexylglycerin
- Sodium Hyaluronate
- Disodium EDTA
- Hydrolyzed Hyaluronic Acid
- Sodium Acetylated Hyaluronate
Highlights
Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains fragranceContains PEGContains silicones
Formulation view SPF30 moisturizing sunscreen relying on zinc oxide and titanium dioxide physical filters, supplemented by novel UVB absorbers. Hyaluronic acid and hydrolyzed jojoba hydrate; cationic polymers suspend powders. Suitable for sensitive skin and children, minimizing chemical absorption risks. Factory observation: High powder content increases viscosity; cationic polymers are crucial for optimizing spreadability.
Key ingredients
- SOLVENT
- Aqua
- HAIR CONDITIONING
- Triethylhexanoin
- LIGHT STABILIZER
- Ethylhexyl MethoxycinnamateDiethylamino Hydroxybenzoyl Hexyl Benzoate
- ANTIMICROBIAL
- Zinc Oxide
- ABRASIVE
- Silica
- HUMECTANT
- Butylene Glycol
- UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)
- Titanium Dioxide
Other ingredients
PEG-20 Sorbitan IsostearateStearyl AlcoholPolysorbate 60Hydrated SilicaPhenoxyethanolAmmonium Acryloyldimethyltaurate/VP CopolymerHydrogen DimethiconeHydrolyzed Jojoba EstersHexylglycerinSodium HyaluronateDisodium EDTAHydrolyzed Hyaluronic AcidSodium Acetylated Hyaluronate
Skim through
| Ingredient | What it does | Irr. · Com. | Rating |
|---|---|---|---|
| Aqua | SOLVENT | 0 · 0 | Green |
| Triethylhexanoin | HAIR CONDITIONING, FRAGRANCE, SKIN CONDITIONING, PERFUMING | 0 · 0 | Green |
| Ethylhexyl Methoxycinnamate | LIGHT STABILIZER, UV ABSORBER, UV FILTER · 限制 VI/12 | 0 · 1 | Yellow |
| Zinc Oxide | ANTIMICROBIAL, BULKING, COLORANT, ORAL CARE, SKIN PROTECTING, LIGHT STABILIZER, UV ABSORBER, UV FILTER · 限制 IV/144 VI/30 VI/30a | 0 · – | Yellow |
| Silica | ABRASIVE, ABSORBENT, ANTICAKING, BULKING, OPACIFYING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Butylene Glycol | HUMECTANT, FRAGRANCE, SKIN CONDITIONING, SOLVENT, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Titanium Dioxide | UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano), the sum shall not exceed the limit given in column g (Maximum concentration in ready for use preparation) · 限制 <empty>; as a constituent of other substances, or in mixtures, in concentrations equal to, or greater than 0.1% by weight; Shall not be placed on the market, or used, as substance or in mixtures in concentrations equal to ot greater than 0.1% by weight; Shall not be used as propellant in aerosols for any use. Aerosols dispenser containing the substance as propellant shall not | 0 · 0 | Yellow |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate | LIGHT STABILIZER, UV ABSORBER, UV FILTER · 限制 VI/28 | 0 · 0 | Yellow |
| PEG-20 Sorbitan Isostearate | SURFACTANT - EMULSIFYING, SURFACTANT - CLEANSING | 0 · 0 | Green |
| Stearyl Alcohol | SKIN CONDITIONING - EMOLLIENT, SURFACTANT - EMULSIFYING, EMULSION STABILISING, SURFACTANT - FOAM BOOSTING, FRAGRANCE, OPACIFYING, REFATTING, SURFACTANT - CLEANSING, VISCOSITY CONTROLLING | 0 · 3 | Green |
| Polysorbate 60 | SURFACTANT - EMULSIFYING, SURFACTANT - CLEANSING | 1 · – | Green |
| Hydrated Silica | ABRASIVE, ABSORBENT, ANTICAKING, BULKING, OPACIFYING, VISCOSITY CONTROLLING | 1 · 0 | Green |
| Phenoxyethanol | ANTIMICROBIAL, PRESERVATIVE · 限制 V/29 | 1 · 0 | Yellow |
| Ammonium Acryloyldimethyltaurate/VP Copolymer | VISCOSITY CONTROLLING | 0 · 0 | Green |
| Hydrogen Dimethicone | FILM FORMING | 0 · 0 | Green |
| Hydrolyzed Jojoba Esters | FILM FORMING, HAIR CONDITIONING, SKIN CONDITIONING | 0 · 1 | Green |
| Hexylglycerin | HUMECTANT | 0 · 0 | Green |
| Sodium Hyaluronate | HUMECTANT, SKIN CONDITIONING | 0 · 0 | Green |
| Disodium EDTA | CHELATING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Hydrolyzed Hyaluronic Acid | HAIR CONDITIONING, HUMECTANT, SKIN CONDITIONING | 0 · 0 | Green |
| Sodium Acetylated Hyaluronate | HUMECTANT | 0 · 0 | Green |
Ingredients explained
- Aqua
- Solvent, main base; microbial control is critical
- Triethylhexanoin
- Light ester for non-greasy feel and fragrance; low allergenicity, high levels can act as solvent
- Ethylhexyl Methoxycinnamate
- UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.
- Zinc Oxide
- Physical UV filter, 30% max in EU; oily at high levels, pair with oils for feel.
- Silica
- Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products
- Butylene Glycol
- Polyol humectant and solvent at 1–5%; aids solubilization, light feel
- Titanium Dioxide
- Physical UV filter and colorant up to 25%; nano form requires attention
- Diethylamino Hydroxybenzoyl Hexyl Benzoate
- Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.
- PEG-20 Sorbitan Isostearate
- Non-ionic emulsifier for O/W systems; used with isostearates, no comedogenic risk.
- Stearyl Alcohol
- Stearic alcohol; fatty alcohol for emulsion thickening/structure, often blended with soaps, moderate comedogenicity.
- Polysorbate 60
- Non-ionic emulsifier and solubilizer for O/W or W/O stability; may cause mild stinging on sensitive skin, typically 1-5%.
- Hydrated Silica
- Inorganic abrasive and oil absorbent; prone to settling, needs dispersant, high levels increase exfoliation
- Phenoxyethanol
- Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin
- Ammonium Acryloyldimethyltaurate/VP Copolymer
- Cationic polymer providing suspension, thickening, and conditioning; often paired with anionic thickening systems, low usage, imparts slip.
- Hydrogen Dimethicone
- Hydrogenated dimethicone for film-forming and slip; low volatility, rich feel for dry skin
- Hydrolyzed Jojoba Esters
- Lightweight emollient and film-former; improves hair slip, generally low concentration.
- Hexylglycerin
- Multifunctional humectant and preservative booster at 0.5–1%; low irritancy, may cause rare sensitization.
- Sodium Hyaluronate
- Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture
- Disodium EDTA
- Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy
- Hydrolyzed Hyaluronic Acid
- Low-MW humectant with superior penetration vs high-MW; 0.1-0.5% typical, hygroscopic, store dry to prevent clumping.
- Sodium Acetylated Hyaluronate
- Acetylated HA; modified for hydrophobicity, improved penetration and non-tacky feel compared to standard HA.
Source: full ingredient list published on the product label, collected 2026-09-17. Ratings are our internal reading, not a regulatory conclusion.
Analyze this product · redesign · create my project → Make a product in this category →