missha M Perfect Cover Bb Cream Spf 42 Pa+++

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Cyclopentasiloxane
3. Ethylhexyl Methoxycinnamate
4. Zinc Oxide
5. Propylene Glycol
6. Titanium Dioxide
7. Caprylic/Capric Triglyceride
8. PEG-10 Dimethicone
9. Glycerin
10. Cetyl PEG/PPG-10/1 Dimethicone
11. Arbutin
12. Mineral Oil
13. Polyethylene
14. Talc
15. Phenyl Trimethicone
16. Beeswax
17. Iron Oxides
18. Sodium Chloride
19. Iron Oxides
20. Iron Oxides
21. Methylparaben
22. Dimethicone
23. Propylparaben
24. Rosa Canina Fruit Oil
25. Squalane
26. Macadamia Ternifolia Seed Oil
27. Simmondsia Chinensis Seed Oil
28. Cyclotetrasiloxane
29. Disodium EDTA
30. Adenosine
31. Algae Extract
32. Rosmarinus Officinalis Leaf Extract
33. Chamomilla Recutita Flower Extract
34. Ceramide NP
35. Butylene Glycol
36. Fagus Sylvatica Bud Extract
37. Hydrolyzed Collagen
38. Caprylyl Glycol
39. Benzyl Alcohol
40. 1,2-Hexanediol
41. Caprylhydroxamic Acid
42. Tocopherol
43. Benzoic Acid
44. Sodium Hyaluronate
45. Phenoxyethanol
46. Tropolone
47. Fragrance
48. Butylphenyl Methylpropional
49. Benzyl Salicylate
50. Hydroxycitronellal
51. Alpha-Isomethyl Ionone
52. Hexyl Cinnamal
53. Linalool
54. Citronellol
55. Limonene

Highlights

Free of sulfatesFree of formaldehyde releasersContains siliconesContains PEGContains mineral oilContains animal-derivedContains fragranceContains parabensContains essential oilsContains EU-26 allergensContains alcohol

Formulation view Silicone-based BB cream with physical UV filters and emollient oils. Enriched with arbutin, adenosine, and botanical extracts for skin tone and moisture. Preserved with parabens and polyols. Ideal for even tone and sun protection. Formulators leverage silicones for slip and adherence, combining humectants and actives to enhance finish and longevity on skin.

Key ingredients

ANTIPLAQUE

Water

SKIN CONDITIONING - EMOLLIENT

Cyclopentasiloxane

LIGHT STABILIZER

Ethylhexyl Methoxycinnamate

ANTIMICROBIAL

Zinc Oxide

HUMECTANT

Propylene Glycol

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

FRAGRANCE

Caprylic/Capric Triglyceride

HAIR CONDITIONING

PEG-10 Dimethicone

Other ingredients

GlycerinCetyl PEG/PPG-10/1 DimethiconeArbutinMineral OilPolyethyleneTalcPhenyl TrimethiconeBeeswaxIron OxidesSodium ChlorideIron OxidesIron OxidesMethylparabenDimethiconePropylparabenRosa Canina Fruit OilSqualaneMacadamia Ternifolia Seed OilSimmondsia Chinensis Seed OilCyclotetrasiloxaneDisodium EDTAAdenosineAlgae ExtractRosmarinus Officinalis Leaf ExtractChamomilla Recutita Flower ExtractCeramide NPButylene GlycolFagus Sylvatica Bud ExtractHydrolyzed CollagenCaprylyl GlycolBenzyl Alcohol1,2-HexanediolCaprylhydroxamic AcidTocopherolBenzoic AcidSodium HyaluronatePhenoxyethanolTropoloneFragranceButylphenyl MethylpropionalBenzyl SalicylateHydroxycitronellalAlpha-Isomethyl IononeHexyl CinnamalLinaloolCitronellolLimonene

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Ethylhexyl Methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Zinc Oxide

Physical UV filter, 30% max in EU; oily at high levels, pair with oils for feel.

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

PEG-10 Dimethicone

Modified silicone for silky feel and shine; PEG structure aids O/W emulsification, used in hair and skin care.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Cetyl PEG/PPG-10/1 Dimethicone

Silicone surfactant, smooth and mild; regulates rheology and adds antistatic benefits

Arbutin

Tyrosinase inhibitor for whitening; typical use 1-2%, comply with EU restrictions on specific arbutins.

Mineral Oil

Occlusive emollient preventing water loss; must use high-purity medical grade to avoid impurities.

Polyethylene

Plastic polymer particles for abrasion or film; check EU ban on microplastics in rinse-off products, flush-off only

Talc

Inorganic mineral powder for texture and oil absorption; must be asbestos-free; fineness affects skin feel and safety, avoid inhalation.

Phenyl Trimethicone

Aromatic modified silicone for high gloss and occlusion; inert, non-volatile, may leave surface residue

Beeswax

Beeswax, natural thickener and film former; provides occlusive moisturization, natural honey scent, animal-derived, potential allergen

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Methylparaben

Preservative, narrow spectrum; often combined, check allergen risk and regulatory limits.

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Propylparaben

Medium-chain preservative; restricted use, pH-sensitive efficacy.

Rosa Canina Fruit Oil

Rosehip oil, rich in oleic/linoleic acids for emolliency/repair; prone to oxidation, needs protection

Squalane

Emollient from plants or synthetic; light texture

Macadamia Ternifolia Seed Oil

Macadamia oil, rich in palmitoleic, good penetration; light feel; non-comedogenic.

Simmondsia Chinensis Seed Oil

Common in dry/damaged hair; superior penetration vs mineral oils, low comedogenic risk, poor oxidative stability.

Cyclotetrasiloxane

Volatile silicone providing slip; D4 is restricted in EU rinse-off products and requires labeling for leave-on use.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Algae Extract

Algae extract with humectant and conditioning effects; may contain natural fragrant components.

Rosmarinus Officinalis Leaf Extract

Plant extract containing rosmarinic acid etc., with antioxidant and antimicrobial properties; may contain allergenic fragrances, patch test for sensitive skin, typical concentration <1%.

Chamomilla Recutita Flower Extract

Plant extract, soothing properties; contains natural allergens, high levels may irritate.

Ceramide NP

Ceramide N3 for barrier repair; lipophilic, needs oil phase or emulsion, avoid high standalone use.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Fagus Sylvatica Bud Extract

Botanical bud extract used as a tonic and skin conditioner; monitor for plant-derived contact sensitization.

Hydrolyzed Collagen

Hydrolyzed protein for film-forming and moisture; molecular weight limits penetration, check source for shellfish allergies

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Benzyl Alcohol

Mild preservative/solvent at 0.5-1.0%; EU allergen (labeling required), irritation risk if concentrated, avoid in infant/highly sensitive skin.

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Caprylhydroxamic Acid

Chelating agent to stabilize metal ions; often paired with antioxidants for system stability, used at low levels

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Benzoic Acid

Preservative and pH adjuster at 0.1–0.5%; low water solubility, best in acidic media, irritant at high levels.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Tropolone

Natural phenolic compound used as a skin conditioner; strong antioxidant activity, often a fragrance alternative.

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Butylphenyl Methylpropional

Synthetic fragrance with floral notes; EU regulations limit usage, strict monitoring required.

Benzyl Salicylate

UV absorber/light stabilizer, restricted in EU; potential sensitizer, risk assessment needed.

Hydroxycitronellal

Hydroxycitronellal, sensitizing fragrance, EU limit <0.1%; avoid use as aerosol propellant.

Alpha-Isomethyl Ionone

Vanilla-like fragrance ingredient; one of EU 26 allergens, caution advised for sensitive skin.

Hexyl Cinnamal

Common fragrance component (jasmine/vanilla note); listed EU allergen, requires labeling at >10ppm (leave-on).

Linalool

Natural fragrance component at ≤0.05%; one of EU 26 allergens, caution for sensitive skin

Citronellol

Citronellol for fragrance; EU 26 allergen, labeling required above 0.001%.

Limonene

Natural fragrance solvent, EU allergen; poor photostability

Related products in this category

• cosrx COSRX Oil-free Ultra-moisturizing Lotion
• skin1004 Skin1004 Madagascar Centella Hyalu-cica Moisture Cream
• innisfree innisfree Jeju Orchid Lotion
• innisfree innisfree Green Tea Hyaluronic Lotion
• dr-jart Dr. Jart+ Cicapair Tiger Grass Calming Gel Cream
• isntree Isntree Yam Root Vegan Milk Cream