innisfree Intensive Triple Care Sunscreen Spf50+ Pa++++

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Propylheptyl Caprylate
3. Titanium Dioxide
4. Zinc Oxide
5. Cyclohexasiloxane
6. Butylene Glycol Dicaprylate/Dicaprate
7. Disiloxane
8. Butylene Glycol
9. Polyglyceryl-5 Polyricinoleate
10. Polymethylsilsesquioxane
11. Glycerin
12. Caprylyl Methicone
13. Dicaprylyl Ether
14. Niacinamide
15. Disteardimonium Hectorite
16. Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone
17. Calcium Aluminum Borosilicate
18. Magnesium Sulfate
19. 1,2-Hexanediol
20. Triethoxycaprylylsilane
21. Octyldodecanol
22. Flavor
23. Dicaprylyl Carbonate
24. Ci 77492
25. Caprylyl Glycol
26. Glyceryl Caprylate
27. Mica
28. Ethylhexylglycerin
29. Aluminum Hydroxide
30. Adenosine
31. Ci 77491
32. Echium Plantagineum Seed Oil
33. Boron Nitride
34. Sodium Hyaluronate
35. Saccharide Isomerate
36. Propanediol
37. Ci 77499
38. Tocopherol
39. Helianthus Annuus Seed Oil Unsaponifiables
40. Cardiospermum Halicacabum Flower/Leaf/Vine Extract
41. Dimethicone/Vinyl Dimethicone Crosspolymer
42. Oryza Sativa Bran Oil
43. Lespedeza Capitata Leaf/Stem Extract
44. Sodium Citrate
45. Citric Acid

Highlights

Free of parabensFree of sulfatesFree of formaldehyde releasersContains siliconesContains alcoholContains EU-26 allergensContains fragranceContains essential oilsContains mineral oil

Formulation view O/W sunscreen with TiO2 and ZnO physical filters. Siloxanes and esters ensure light texture. Niacinamide, HA, and sunflower oils repair. Pigments adjust tone. Suitable for all skin types. Formulator's note: Hybrid physical-chemical formulation reduces heaviness via silicone systems; added botanicals enhance tolerance, though physical types may need setting on oily skin.

Key ingredients

ANTIPLAQUE

Water

SKIN CONDITIONING - EMOLLIENT

Propylheptyl CaprylateCyclohexasiloxaneButylene Glycol Dicaprylate/Dicaprate

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

ANTIMICROBIAL

Zinc Oxide

ANTIFOAMING

Disiloxane

HUMECTANT

Butylene Glycol

Other ingredients

Polyglyceryl-5 PolyricinoleatePolymethylsilsesquioxaneGlycerinCaprylyl MethiconeDicaprylyl EtherNiacinamideDisteardimonium HectoritePolyglyceryl-3 Polydimethylsiloxyethyl DimethiconeCalcium Aluminum BorosilicateMagnesium Sulfate1,2-HexanediolTriethoxycaprylylsilaneOctyldodecanolFlavorDicaprylyl CarbonateCi 77492Caprylyl GlycolGlyceryl CaprylateMicaEthylhexylglycerinAluminum HydroxideAdenosineCi 77491Echium Plantagineum Seed OilBoron NitrideSodium HyaluronateSaccharide IsomeratePropanediolCi 77499TocopherolHelianthus Annuus Seed Oil UnsaponifiablesCardiospermum Halicacabum Flower/Leaf/Vine ExtractDimethicone/Vinyl Dimethicone CrosspolymerOryza Sativa Bran OilLespedeza Capitata Leaf/Stem ExtractSodium CitrateCitric Acid

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Propylheptyl Caprylate

Light ester for smooth, non-volatile feel; non-comedogenic and low irritation

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Zinc Oxide

Physical UV filter, 30% max in EU; oily at high levels, pair with oils for feel.

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Butylene Glycol Dicaprylate/Dicaprate

Light diester emollient, light and non-greasy; often used as solvent; oxidizes easily, needs antioxidants.

Disiloxane

Low-viscosity silicone for defoaming and slip; non-comedogenic, volatile, for light formulas.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Polyglyceryl-5 Polyricinoleate

Nonionic emulsifier derived from ricinus; blends well with mineral oil systems; calibrate for O/W and avoid strong anionic competition.

Polymethylsilsesquioxane

Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Caprylyl Methicone

Volatile silicone, fresh feel, does not absorb oil, used in foundations and cushions.

Dicaprylyl Ether

Lightweight diester solvent and emollient, non-greasy feel; common oil phase carrier; low irritation.

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone

Water-soluble silicone conditioning agent providing smooth, non-greasy feel; suitable for both hair and skin

Calcium Aluminum Borosilicate

Synthetic powder filler for smooth feel and coverage; inert.

Magnesium Sulfate

Bulk agent at 0.1–1%; highly water-soluble, avoid high local concentration.

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Octyldodecanol

Light emollient/emulsifier at 1-5%; low comedogenic, non-greasy feel, broadly compatible, sensitive-skin friendly.

Flavor

Food-grade flavoring; verify cosmetic compliance and allergen content if used in skincare.

Dicaprylyl Carbonate

Light emollient solvent at 5–15%; mineral oil-free, refreshing feel, low sensitization.

Ci 77492

Iron oxide red; stable inorganic pigment, non-toxic; ensure dispersion to prevent sedimentation.

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Glyceryl Caprylate

Mild emulsifier/deodorant at 0.5-2%; polyol ester, high humectancy, low irritancy, check cationic surfactant compatibility.

Mica

Mineral colorant for pearlescence; heavy metal screening required

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Ci 77491

Iron oxides red; physical pigment. Coloring and photo-protective, stable and non-irritating.

Echium Plantagineum Seed Oil

Linoleic-rich seed oil; high oxidation risk, requires antioxidants and light protection to maintain stability

Boron Nitride

Flake-shaped inorganic filler for slip and bulk in powders; control particle size to minimize inhalation risk

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Saccharide Isomerate

Novel polyol humectant with skin feel improvement; high hydration, suitable for lightweight formulas.

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Ci 77499

Inorganic colorant manganese dioxide used in cosmetics; restricted use component subject to regulatory limits.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Helianthus Annuus Seed Oil Unsaponifiables

Sunflower oil unsaponifiables; squalene, tocopherol. Lightweight antioxidant, sensitive to oxidation, store light-protected and N2 flushed.

Cardiospermum Halicacabum Flower/Leaf/Vine Extract

Plant-derived skin-conditioning extract; used at low levels, stability must be verified.

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Oryza Sativa Bran Oil

Rice bran oil rich in oryzanol and linoleic acid for conditioning; moderate comedogenic rating, mind oxidative stability.

Lespedeza Capitata Leaf/Stem Extract

Botanical extract for skin conditioning and protection; no known allergen alerts.

Sodium Citrate

Sodium citrate for buffering and chelating; adjust pH, careful with strong acid reactions.

Citric Acid

Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH

Related products in this category

• missha Missha Magic Cushion Cover Lasting Spf 50 Pa+++
• innisfree innisfree Tone Up Calamine Sunscreen Stick Spf50+ Pa++++
• innisfree innisfree True Care Non-nano Sun Screen SPF48 Pa+++
• missha Missha Cicadin Rescue Water Sunscreen Stick
• jumiso JUMISO Awesun Airy-Fit Sunscreen
• nature-republic Nature Republic California Aloe Fresh Powdery Sun Stick SPF50+ Pa++++